Artifex Fabricatum
Sigrun Blackblade Nightfang, Barbarian Figurine 75mm
Sigrun Blackblade Nightfang, Barbarian Figurine 75mm
Couldn't load pickup availability
Sigrun Blackblade Nightfang charges forward with both blades drawn, a fury of wind-whipped hair, cracked stone swords and layered barbarian armour frozen at the peak of her assault. She stands 70mm tall without her display base, a commanding 75mm scale centrepiece that fills a shelf with presence and motion. Her feathered pauldrons, riveted breastplate, engraved knee guards and fur-trimmed boots are sculpted with the kind of surface depth that rewards careful painters and holds washes beautifully.
Sculpted by Broken Sword, Sigrun arrives as a physical resin figurine with supports already removed and surfaces cleaned, ready for assembly and painting. The kit includes the figure, a separate cape piece and a detailed display base scattered with rubble, broken timber and a fallen skull. Assembly is straightforward and the join points are clean.
The dual stone-textured swords are a standout feature, their cracked blade surfaces taking drybrushing and glazing techniques particularly well. The dynamic pose, one leg raised mid-stride, gives the finished piece genuine energy on the shelf. Sigrun Blackblade is the kind of sculpt that rewards time and patience at the painting table.
Supplied unpainted and unassembled. One figurine per pack.
Painting Guide: Sigrun Blackblade Nightfang, Barbarian Figurine 75mmThe mix of organic textures, ornate metalwork and cracked stone blades gives you plenty of variety to work through. Take your time across each material zone and the whole piece will read clearly from across a room.
1. Prime
- Apply a grey or warm mid-tone primer across the full assembled piece to reveal all surface detail before you commit to a colour scheme.
- A zenithal highlight pass with white from directly above helps define the light source early and speeds up later shading.
2. Armour Base
- Block in the leather armour sections with a deep brown such as Rhinox Hide or Dryad Bark, then build up through Mournfang Brown to Skrag Brown at the highest edges.
- The breastplate and knee guards suit a dark iron tone. Start with Abaddon Black mixed with a little grey, then layer up with Leadbelcher on raised surfaces only.
3. Trim and Details
- Pick out the circular medallions, rivets and headband gem in a warm brass or bronze. Gehenna's Gold over a Rhinox Hide base reads well at this scale.
- Add a thin recess wash of Agrax Earthshade across the leatherwork and armour plates to push depth into all the engraved panel lines.
4. Weapons
- The cracked stone swords call for a cool, desaturated palette. Base with a mid-grey such as Mechanicus Standard Grey, wash with thinned Nuln Oil and drybrush the raised crack edges with Administratum Grey and then White Scar at the very tips.
- A thin glaze of a pale blue or purple over the blade flats before the final drybrush pass adds a subtle magical quality without overpowering the stone feel.
5. Weathering
- Stipple chipping onto the armour plates using a torn blister foam piece and a dark brown mixed with black. Keep chips small and concentrate them on the most exposed edges.
- Draw fine rust streaks downward from rivets using a thinned Troll Slayer Orange, then immediately blur the lower end of each streak with a damp clean brush.
6. Bases
- Drybrush the rubble and skull base in successively lighter stone tones from Mechanicus Standard Grey up through Administratum Grey, then pick out the skull with Ushabti Bone highlighted to Screaming Skull.
- A few tufts of dry grass around the edges of the base tie the groundwork together and frame the figure without competing with the sculpt above.
This is an adult hobbyist collectible, not a toy. Not suitable for children under 14 years due to small, detailed parts.
Designed by
Broken Sword
View all 32 miniatures
Share
