Artifex Fabricatum
Ragna Skullbreaker, Barbarian Figurine 75mm
Ragna Skullbreaker, Barbarian Figurine 75mm
Couldn't load pickup availability
Ragna Skullbreaker tears across the battlefield with her great axe raised and fury written across every sculpted muscle, a 75mm resin figurine that commands attention the moment it hits the shelf. Standing 70mm tall without her base, she is a full-blooded barbarian warrior caught at the peak of her charge, one boot planted on a cracked rock, skull and bone debris scattered beneath her feet, hair whipping behind her as though the wind itself is trying to keep up.
Supplied unpainted.
Her equipment tells its own story. The double-headed axe is massive and brutally detailed, bound with wrapped cord and studded with age-worn metal. Her pauldron rises with jagged horns on the right shoulder, while fur-trimmed bracers, a layered belt of worn leather medallions, and shaggy hide greaves complete the picture of a warrior who takes trophies from every fight. The base is a generous scenic platform of broken stone and scattered bones, adding real height and drama to the finished piece.
Sculpted by Broken Sword, Ragna arrives as a physical resin miniature with supports already removed and cleaned, ready for assembly and paint. The 75mm scale gives painters serious surface area to work with, every strand of hair, every rivet, every fur tuft offering a crisp edge to pick out.
Supplied as figure and display base. One figurine per pack.
Painting Guide: Ragna Skullbreaker, Barbarian Figurine 75mmAt 75mm scale, Ragna rewards careful layering and contrast work. The large open skin areas and mix of leather, metal, bone and fur give you plenty of room to practise different techniques across a single figure.
1. Prime
- Apply a grey or warm mid-tone primer to pick up the fine surface detail across fur edges and the axe blade.
- A zenithal highlight pass with white from directly above will establish your natural light source before you apply a single colour.
2. Armour Base
- Basecoat the shoulder pauldron and bracers in a deep brown leather tone such as Rhinox Hide or Mournfang Brown.
- Block in the fur trim and hide skirt with an off-white or pale bone colour to separate it cleanly from the leather underneath.
3. Trim and Details
- Pick out the belt medallions and pauldron rivets in a dark silver base, then highlight up to a bright metallic to suggest worn iron.
- The leather cord wrapping on the axe shaft and bracers benefits from a strong sepia wash followed by edge highlights in a warm tan.
4. Weapons
- Basecoat the axe blade in Leadbelcher or similar mid-silver and wash with Nuln Oil to settle into the etchings and rivet holes.
- Highlight the cutting edges with Stormhost Silver and add a thin glaze of brown at the base of the blade to suggest old dried blood or rust.
5. Weathering
- Stipple a small amount of brown and orange around the lower axe blade and boot buckles using a torn sponge or dry brush for chipped-paint and rust effects.
- Use a thinned brown wash around the base of the fur trim and boot soles to suggest mud and terrain contact without muddying the cleaner upper armour.
6. Bases
- Drybrush the cracked stone base in successive layers from dark grey to near-white to bring out the sharp relief, then paint the skull in pale bone and add a thin green or brown wash into the eye sockets for depth.
This is an adult hobbyist collectible, not a toy. Not suitable for children under 14 years due to small, detailed parts.
Designed by
Broken Sword
View all 32 miniatures
Share
