{"product_id":"the-death-tithe-collector-32mm-resin-miniature","title":"The Death-Tithe Collector - 32mm Resin Miniature","description":"\u003cp\u003eThe Death-Tithe Collector is a single, imposing resin miniature standing at 32mm scale and built to dominate any warband roster or display shelf. Sculpted by Atlan Forge, this hulking warrior channels the fury of a blood-sworn champion, armoured from boot to pauldron in brutalist plate covered in skulls, chains, devotional markings and the trophies of a hundred slain enemies. Every surface rewards a close look: riveted panels sit alongside exposed musculature, icon-stamped knee guards press against chain-draped tassets, and a massive serrated axe with a churning circular saw blade occupies one gauntleted fist while a heavy spiked bludgeon fills the other.\u003c\/p\u003e\u003cp\u003eThe figure arrives as a pre-printed physical resin miniature with supports already removed and surfaces cleaned. The kit is modular, with separate head options (a horned helmet, an open-faced respirator mask, and a bare, scarred human head mid-roar) plus alternative backpack and arm options, giving you genuine build choices before a single brushstroke is applied. Everything is supplied unpainted and unassembled, so what you receive is crisp, clean resin ready for a wash and a look over before gluing. The base shown is a plain 32mm round, which is included.\u003c\/p\u003e\u003cp\u003eAs a single character piece, the Death-Tithe Collector works equally well as a warlord model in a larger warband, a centrepiece on a display board, or a standalone painting project for anyone who wants a model with enough surface detail to keep a brush busy across a full weekend.\u003c\/p\u003e\u003cp\u003eScale: 32mm. Material: resin. Supplied unpainted and unassembled. Supports removed. One miniature per order.\u003c\/p\u003e\u003cb\u003ePainting Guide: The Death-Tithe Collector\u003c\/b\u003e\u003cp\u003eThe model rewards a dark, saturated palette built around aged metal, deep reds and bone. The notes below are suggestions based on the sculpt's major surface areas.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e1. Prime\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eApply a black spray primer for maximum shadow depth in the recesses, or grey if you prefer a brighter mid-tone starting point for red armour panels.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003e2. Armour Base\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBasecoat the plate panels in a deep burgundy or dark red. A single thin highlight along upper edges adds immediate definition without overcomplicating the process.\u003c\/li\u003e\n\u003cli\u003eLeave recesses dark and apply a dark brown or black wash across all armour panels to settle into the etched markings and rivets.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003e3. Trim and Details\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePick out raised trim, chains and studs in a tarnished brass or old gold, then shade with a dark brown wash to kill any cartoon brightness.\u003c\/li\u003e\n\u003cli\u003ePaint skulls and bone trophies in a pale ochre, wash with a sepia tone and drybrush with off-white for a natural aged bone finish.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003e4. Weapons\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBasecoat the axe blade and bludgeon in a dark iron, then drybrush with a brighter silver selectively on edges and teeth to suggest well-used, chipped metal.\u003c\/li\u003e\n\u003cli\u003eAdd thin glazes of red or rust brown near saw teeth and blade edges to suggest dried battle residue without overpainting the metallics.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003e5. Weathering\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSponge chips onto armour panels using a torn blister foam piece loaded with dark metal paint, focusing on knees, elbows and pauldron edges.\u003c\/li\u003e\n\u003cli\u003eApply a targeted oil wash or dark enamel pin wash into every recess to sharpen all the engraved iconography and chain links.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003e6. Bases\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eTexture the 32mm round base with fine sand or a commercial paste, paint in dark earth tones and add a few scattered bone fragments or gravel pieces to match the grim theme of the figure.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eThis is an adult hobbyist collectible, not a toy. Not suitable for children under 14 years due to small, detailed parts.\u003c\/p\u003e","brand":"Artifex Fabricatum","offers":[{"title":"Default Title","offer_id":58647593582924,"sku":"ATLANFORGE-DEATH-TITHE-COLLECTOR-32MM","price":13.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/9259\/1180\/files\/main_0e2d1414-f3ab-4c90-b5cc-5c0389a568ab.png?v=1788257387","url":"https:\/\/artifexfabricatum.co.uk\/products\/the-death-tithe-collector-32mm-resin-miniature","provider":"Artifex Fabricatum","version":"1.0","type":"link"}