{"product_id":"anchorite-supay-the-farstrike-38mm-resin-miniature","title":"Anchorite Supay The Farstrike - 38mm Resin Miniature","description":"\u003cp\u003eAnchorite Supay The Farstrike arrives as a single physical resin miniature, standing approximately 38mm from feet to eyes, cast in clean grey resin with supports already removed and surfaces cleaned, ready to assemble and paint straight from the box. Supplied unpainted.\u003c\/p\u003e\u003cp\u003eThe kit contains 7 parts, giving you a focused and satisfying build. The separate head, weapon arm, crescent arc frame, and accessory details all benefit from careful dry-fitting before any glue is applied, allowing you to confirm alignment and achieve a clean final result.\u003c\/p\u003e\u003cp\u003eThe figure depicts a lithe, masked warrior mid-stride, robed in billowing layered cloth with exposed musculature at the core. One arm thrusts forward a long, segmented lance crackling with eldritch energy, while the other grips a ringed charm hung with a short blade. A towering crescent arc rises behind the figure, bound at its joints with wrapped cord and tipped with curved hook-blades, forming a dramatic backdrop that doubles as a structural anchor for the composition. The base is strewn with roots and fractured terrain, completing a scene full of aggressive forward momentum.\u003c\/p\u003e\u003cp\u003eSculpted by DakkaDakka, this piece carries the same dynamic, stylised energy found across their wider range of fantasy warrior characters.\u003c\/p\u003e\u003cb\u003ePainting Guide: Anchorite Supay The Farstrike\u003c\/b\u003e\u003cp\u003eThe render palette leans into cold armour against warm skin tones, with vivid teal energy effects providing the primary accent. The suggestions below follow that scheme closely.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e1. Prime\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eApply a light grey spray primer across all parts before assembly, or prime once built if you prefer to check fit first.\u003c\/li\u003e\n\u003cli\u003eA zenithal highlight pass in white from above will help pick out the raised details on the armour and crescent frame.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003e2. Armour Base\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBasecoat the helmet, shoulder armour, and arm plating with a cool blue-grey such as Fenrisian Grey or Vallejo Wolf Grey.\u003c\/li\u003e\n\u003cli\u003eShade the recesses with Nuln Oil or Drakenhof Nightshade to push depth into the segmented collar and elbow joints.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003e3. Trim and Details\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePick out the bone-coloured trim, horns, and wing-shaped shoulder flanges with Zandri Dust, then highlight up to Ushabti Bone.\u003c\/li\u003e\n\u003cli\u003ePaint the cord wrappings on the crescent arc and weapon shaft with Mournfang Brown, drybrushed lightly with Baneblade Brown.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003e4. Weapons\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBasecoat the lance shaft and crescent arc in Leadbelcher, then wash with Agrax Earthshade to add age and grime to the mechanical sections.\u003c\/li\u003e\n\u003cli\u003eFor the energy glow on the lance tip and blade edges, start from white at the hottest point and blend outward through Ice Blue into Sotek Green, finishing with a thin glaze of Waywatcher Green at the outer fringe.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003e5. Weathering\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eApply fine edge chipping with a sponge and Skavenblight Dinge across the armour panels and crescent frame to suggest hard use.\u003c\/li\u003e\n\u003cli\u003eAdd light rust streaking below the cord bindings using thinned Troll Slayer Orange, pulling strokes downward with a fine detail brush.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003e6. Bases\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePaint the root texture with Rhinox Hide, drybrush with Mournfang Brown, and finish with Deathclaw Brown highlights to pick out the ridges.\u003c\/li\u003e\n\u003cli\u003eThe crystal formations on the base suit the same teal palette as the weapon glow, worked up from Sotek Green through Skink Blue to a White Scar tip.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis is an adult hobbyist collectible, not a toy. Not suitable for children under 14 years due to small, detailed parts.\u003c\/p\u003e","brand":"Artifex Fabricatum","offers":[{"title":"Default Title","offer_id":59272918565196,"sku":"DAKKADAKKA-ANCHORITE-SUPAY-FARSTRIKE-38MM","price":13.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/9259\/1180\/files\/cover_3.jpg?v=1792272414","url":"https:\/\/artifexfabricatum.co.uk\/products\/anchorite-supay-the-farstrike-38mm-resin-miniature","provider":"Artifex Fabricatum","version":"1.0","type":"link"}